Wooden floor arching how to do the wooden floor arching what is the reason

Many people nowadays put a layer of wooden floorboards in their bedrooms so that they feel more comfortable and can make our home life more enjoyable. Although the wooden floor is good, but it is also prone to some problems, such as when we encounter the wooden floor arching will be very upset, I do not know what to do. What about the wooden floor arching ? Today, Xiao Bian came to explain with you how the wooden floor arching and the wooden floor arching are the reasons for the relevant knowledge, together to understand it!

How to do the arching of wooden floor

1. First of all, for the floor that has been arched, we need to remove them at the first time, then dry the floors in a ventilated place. After the air is dry, we can check the quality of the floors to see if they can be again. use. However, it is advisable not to use it anymore. The water content of the floor soaked in water is different from that of the surroundings, and it is easy to cause deformation again. We better replace these arched floors.

2, if the phenomenon of arching is not obvious, the degree is relatively small, then we can close the doors and windows, and then use the dehumidification function of the air conditioner in order to control the indoor humidity, so that the phenomenon of arching the wooden floor can be restored. If the degree of arching is very serious, it is recommended that the master resurrection, and re-adjust the expansion joints, remove the skirting board, replace the old floor; in the demolition, if the floor surface is damaged, it should be replaced with a new floor.

3. If there is only a small area of ​​cracks in the floor-street seams, then we can place some heavy objects on top of these floors to hold them down. Then wait for a while to see if the floor has returned to normal. After heavy pressure, the floor can be waxed, and the foamed floor after waxing is almost the same as the original.

4. If it is because of the arching caused by its expansion joints, we must first get out of the seams. When we replace the floor again, we will need to remove the deformed floor, then we will level the floor with cement and replace it with a new one so that the floor can be flat as it was.

What causes the arching of the wooden floor?

1, due to weather, in the summer and fall and winter seasons alternately, the weather is relatively large, there will be a long continuous dry weather, resulting in a substantial degree of water inside the solid wood floor, there is a large degree of inadequacies appear like Alice.

2, long-term direct sun will also cause it to appear arching phenomenon.

3, long-term use of air-conditioning, while the doors and windows have been closed, the indoor air does not circulate, there is no wet air to supplement it and cause the wooden floor to arch.

4. When installing, the reserved gap is too large. When dry weather is encountered, the gap will become larger, causing the floor to arch.

Xiao Bian's words: For the case of arching, we do not worry too much, it can be repaired, but we need to choose the appropriate solution according to different situations, so as to better solve this problem. The above is the relevant knowledge of Xiaobian and everyone to explain how to do the wooden floor arching and wood floor arching. I hope I can give you some references! More related content, you can pay attention to Qijia information, follow-up will present more exciting content!

Wooden floor arching

Black POM Rod

Black Pom Rod,Black Delrin Rod,Black Acetal Rod,Acetal Round Bar

Ningbo Zero Engineering Plastics Co.,Ltd , https://www.zero-peek.com